Accessories

Sort By:  
R138  Inc Tax
1pcs 8x22x7mm Ball Bearing sealed (608RS /608-2RS/Z R-2280HH)
Description:
1pcs Deep Groove Miniature Bearing Sealing 608-2RS 608RS Deep Groove Ball Bearing
 
Widely used in hardware, processing machinery, machine tool equipment, gear box, instrument and meter, motor, household appliances, internal combustion engine, transport vehicles, agricultural machinery, construction machinery, engineering machinery, ect
 
Specifications:
Type: 608RS /608-2RS/Z R-2280HH
Raceway type: Deep Groove Raceway
Sealed dust form: RS
Material: Bearing Steel
Precision: ABEC-7
Inside diameter: 8mm
Outside diameter: 22mm
Thickness: 7mm
Quantity: 1pcs
 
Feature:
Deep groove ball bearing
2RS double sided shield sealing design,protect the bearing efficiently,easy to clean.
ABEC-5 standard precision
High strength and speed
Ideal for skateboard usage
 
Package Included:
1pcs x Ball Bearings
R3  Inc Tax
1pcs Deep Groove Miniature Ball Bearing (624ZZ-4x13x7mm-HCS-U)
Description:
1pcs 624ZZ 4x13x7mm HCS U Groove Sealed Ball Bearings Guide Pulley Ball Bearings

Specification:

Material: high carbon steel
Type624ZZ
Inner Diameter4mm
Outer Diameter13mm
Thickness7mm
Width4.5mm
Depth1.7mm

Feature:
U groove Sealed Ball Bearings
This item is ordinary precision, adaptation to low speed, low load applications.
 
Package Included:
1x  U groove Sealed Ball Bearings
R8  Inc Tax
20T GT2 Aluminium Timing Pulley 5 mm ID
20T GT2 Aluminium Timing Pulley

GT2 Pulley:

 
Teeth width: 2mm
Teeth number: 20
Groove width: 6mm
Teeth width: 7mm (Suitable for a 6mm synchronous GT2 belt)
Diameter of bore: 5mm
Flange: Double
Material: Aluminium
Setscrews: M4
R14  Inc Tax
Nema 17 Motor bracket 727/1 L-Shaped
Designed for heavy-duty industrial and model applications this robust unit boasts a powerful high quality, five pole motor with sintered bronze bearings. The metal gearbox incorporates sleeved bearings, enabling the high torque transfer from the motor to be transmitted through the gearbox.

email peter@hornet.cc for the data sheets and more info
R24  Inc Tax
Stepper motor and driver (A4988)

Description:

This is 28YBJ-48 DC 5V 4 phase 5 wire stepper motor with ULN2003 driver board
5-wire phase can drive ordinary uln2003 chip can also be connected as phase 2 may be supporting the development board, direct plug, easy to use stepper motor used in the development board

If you need English file for this product, please write email to wangzhanxiemeijuan@banggood.cn


Specification :

Rated voltage : 5VDC
Number of Phase 4
Speed Variation Ratio 1/64
Stride Angle 5.625° /64
Frequency 100Hz
DC resistance 50Ω±7%(25℃)
Idle In-traction Frequency > 600Hz
Idle Out-traction Frequency > 1000Hz
In-traction Torque >34.3mN.m(120Hz) "0.35 kg.cm"
Self-positioning Torque >34.3mN.m
Friction torque 600-1200 gf.cm
Pull in torque 300 gf.cm
Insulation grade A

ULN2003 driver board:
A, B, C, D LED indication Four-phase stepper motor work status
Size: 31x35mm

Package included:

1 x ULN2003 driver board
1 x 28BYJ-48 stepper motor

R29  Inc Tax
10pcs 8x22x7mm Ball Bearing Seal Ring (608RS /608-2RS/Z R-2280HH)
Description:
10 pcs Deep Groove Miniature Bearing Sealing 608-2RS 608RS Deep Groove Ball Bearing
 
Widely used in hardware, processing machinery, machine tool equipment, gear box, instrument and meter, motor, household appliances, internal combustion engine, transport vehicles, agricultural machinery, construction machinery, engineering machinery, ect
 
Specifications:
Type: 608RS /608-2RS/Z R-2280HH
Raceway type: Deep Groove Raceway
Sealed dust form: RS
Material: Bearing Steel
Precision: ABEC-7
Inside diameter: 8mm
Outside diameter: 22mm
Thickness: 7mm
Quantity: 1pcs
 
Feature:
Deep groove ball bearing
2RS double sided shield sealing design,protect the bearing efficiently,easy to clean.
ABEC-5 standard precision
High strength and speed
Ideal for skateboard usage
 
Package Included:
10 pcs x Ball Bearings
R29  Inc Tax
Polymer roller wheel for Tevo Terantula 3D printer
Specifications:

Type: Pulley
Outside Diameter: about 24mm
Bore: 5mm
Thickness: about 10.23mm
Size: about 24*16*10.23mm
Material: POM
With Bearings: YES
Bearing: 625zz bearing
 
R33  Inc Tax
16T GT2 Aluminium Idler Pulley
20T GT2 Aluminium Timing Pulley

GT2 Pulley:

 
Teeth width: 2mm
Teeth number: 20
Groove width: 6mm
Teeth width: 7mm (Suitable for a 6mm synchronous GT2 belt)
Diameter of bore: 3mm
Flange: Double
Material: Aluminium
R39  Inc Tax
20T GT2 Aluminium Idler Pulley
20T GT2 Aluminium Timing Pulley

GT2 Pulley:

 
Teeth width: 2mm
Teeth number: 20
Groove width: 6mm
Teeth width: 7mm (Suitable for a 6mm synchronous GT2 belt)
Diameter of bore: 5mm
Flange: Double
Material: Aluminium
R39  Inc Tax
NEMA 17 Straight Bracket
Designed in house. If you need a drawing of the part please email peter@hornet.cc for the data sheets and more info.
R63  Inc Tax
10 pcs Deep Groove Miniature Ball Bearing (624ZZ-4x13x7mm-HCS-U)
Description:
1pcs Deep Groove Miniature Bearing Sealing 608-2RS 608RS Deep Groove Ball Bearing
 
Widely used in hardware, processing machinery, machine tool equipment, gear box, instrument and meter, motor, household appliances, internal combustion engine, transport vehicles, agricultural machinery, construction machinery, engineering machinery, ect
 
Specifications:
Type: 608RS /608-2RS/Z R-2280HH
Raceway type: Deep Groove Raceway
Sealed dust form: RS
Material: Bearing Steel
Precision: ABEC-7
Inside diameter: 8mm
Outside diameter: 22mm
Thickness: 7mm
Quantity: 1pcs
 
Feature:
Deep groove ball bearing
2RS double sided shield sealing design,protect the bearing efficiently,easy to clean.
ABEC-5 standard precision
High strength and speed
Ideal for skateboard usage
 
Package Included:
1pcs x Ball Bearings
R75  Inc Tax
917D8 – inline coupling. 3mm-3mm
Designed for heavy-duty industrial and model applications this robust unit boasts a powerful high quality, five pole motor with sintered bronze bearings. The metal gearbox incorporates sleeved bearings, enabling the high torque transfer from the motor to be transmitted through the gearbox.

email peter@hornet.cc for the data sheets and more info
R81  Inc Tax
Drag Chain
Specifications:

- Material: Plastic
internal Size:10*30mm
Total Length: 1M
Colour: black
- For: 3D printer
- With two mounting connectors

Package Included:

1 x 10*30mm Plastic Towline
  
R138  Inc Tax
TMC 2130 Silent Stepper Driver (TMC2130)
Datasheet -> https://drive.google.com/open?id=1H-yPK35oIs8Xi5T5mgvwgq4zCX3zk-47
R334  Inc Tax
Arduino Uno and CNC sheild kit (Mega )
CNC Shield Board:

Version: 3.0
Color: Red
Size(L*W*H): 68 x 53 x 18 mm
Voltage: DC 12~36 V (At the moment only the DRV8825 drivers can handle up to 36V so please consider the operation voltage when powering the board.)

Features:

1. Uses removable DRV8825 compatible stepper drivers.
2. The extension board can be used for carving machine, 3 d printer driver expansion board
3. GRBL 0.8 compatible. (Open source firmware that runs on an Arduino-UNO that turns G-code commands into stepper signals)
4. PWM Spindle and direction pins,4-Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins D12 and D13)
5. Compact design. Stepper Motors can be connected with 4 pin molex connectors or soldered in place.
6. Please note that this is an unassembled kit and Basic soldering skills are needed.

A4988 Stepper Motor Driver:

Color: Red
Size(L*W*H): 20 x 15 x 10 mm
Thermal shutdown circuitry: Yes
Crossover-current protection: Yes
Ground fault protection: Yes
Load short-circuit protection: Yes
Compatible logic supply: 3.3V and 5 V
Five selectable step modes: full, 1/2, 1/4, 1/8 and 1/16

Uno R3 Board:

MCU: ATmega328
Clock speed: 16 MHz
USB interface: ATmega16U2
Operating voltage: 5 V
I-I / O pin output current: 40 mA max
3.3 V output current: 150 mA max
Digital I/O pins: 14 (including 6 with PWM capability)
Analog input pins: 6
EEPROM: 1 kB
Static RAM (SRAM): 2 kB
Flash memory: 32 kB
Size(L*W*H): 68 x 53 x 10 mm


Package included:

1 x Uno
-R3 Board
1 x CNC Shield Board
4 x DRV8825 Stepper Motor Driver
4 x Heat Sink
1 x USB Cable
1 x 40-Pin Row Needles
R357  Inc Tax
DC Motor speed controller - 919D2PR Bi-Directional, 6-15V, 3A / 5A

919D Series Bi-Directional Speed Controller

Forward and reverse PWM speed regulator
Easy installation - unit panel mounted through 9.5mm hole. (Electrical connection via screw terminals)
6 → 15V operation d.c. (from smooth non digital d.c. input)
Output 0 → 100% of input voltage
Compact construction - board size 66 x 58mm

R497  Inc Tax
Nema 17 M1173020 (0.28Nm 0.7A)
A wide range of stepper motors available from stock characterized by high torque, compact size and competitive price.LAM Technologies offers high quality stepper motors in combination with its drives to provide a modern and performing motion control solution. 4 week lead time     https://drive.google.com/drive/folders/0BySRlxy9ZcVccko2MGM3U0lldlE
R868  Inc Tax
Nema 17 M1173030 (0.40Nm 0.7A)

https://drive.google.com/drive/folders/0BySRlxy9ZcVccko2MGM3U0lldlE
The motors with torque higher than 1,5Nm (213 oz-in) are available with shaft with single or double flat, for a simple and secure fastening. Upon request, we can provide stepper motors with key and double shaft. 4-6 weeks Lead time.
R904  Inc Tax
Nema 23 M1233021 (0.80Nm 0.62A)
The motor shaft can be supplied with a diameter of 6,35mm (0,250In) or 8mm (0,315In) with flattening (recommended for motors with torque over 1,5Nm 213In).
4-6 Week Lead Time.
https://drive.google.com/drive/folders/0BySRlxy9ZcVccko2MGM3U0lldlE
R1,083  Inc Tax
Nema23 M1233032D (1.1Nm 2.5A)
The motor shaft can be supplied with a diameter of 6,35mm (0,250In) or 8mm (0,315In) with flattening (recommended for motors with torque over 1,5Nm 213In).
4-6 Weeks Lead Time.
https://drive.google.com/drive/folders/0BySRlxy9ZcVccko2MGM3U0lldlE
R1,011
MKS GEN L Mainboard+Mini MOS Module+LCD 12864 Display+6Pcs Limit Swich+5Pcs A4988 Driver Kit 3D Printer Parts (Mega )
Package List:

1 x MKS GEN L motherboard
1 x USB cable
1 x MOS MINI module
2 x Power cord line
1 x 12864 display
6 x limit switch with cable
5 x A4988 drive(red/green send randomly)
5 x Heat sink

Features:

About MKS GEN L Mainboard:
 1. Integrate 2560 and Rampsl.4 to one PCB, easier wiring and more stable.
 2. Use high-quality 4-layer PCB.
 3. Use Marlin firmware,same configuration way as Rampsl.4, it can replace Rampsl.4di-rectly.
 4. Use special power chip, support 12V-24V.
 5. Support a variety of stepper drivers: 4988,8825,TMC2208 and TMC2100.
 6. Available to work with LCD2004, LCD12864, MKS TFT24/28/32/35/70.
 7. Accept 24V input, reduce the heated bed current to 1/4 that solves th Mosfet heat problem efficiently.
 8. Available to connect external large stepper drivers.
 9. Retain Servos, AUX-1 and AUX-2 interface of Ramps 1.4, provide three 5V output and three 12V output interfaces.
R1,242  Inc Tax
Nema23 M1233061 (1.8Nm 3.0A)

The motor shaft can be supplied with a diameter of 6,35mm (0,250In) or 8mm (0,315In) with flattening (recommended for motors with torque over 1,5Nm 213In).

The models M1233070 and M1233071 supply the highest torque amongst the motors with NEMA23 flange available on the market.

4-6 Weeks Lead Time.
https://drive.google.com/drive/folders/0BySRlxy9ZcVccko2MGM3U0lldlE

R1,553  Inc Tax
Nema 23 M1233070S8 (3.0Nm 4.2A)

The motor shaft can be supplied with a diameter of 6,35mm (0,250In) or 8mm (0,315In) with flattening (recommended for motors with torque over 1,5Nm 213In).

The models M1233070 and M1233071 supply the highest torque amongst the motors with NEMA23 flange available on the market.
4-6 Weeks Lead Time.
https://drive.google.com/drive/folders/0BySRlxy9ZcVccko2MGM3U0lldlE

R2,070  Inc Tax
LAM Technologies Stepper Motor driver DS1044 (50Vdc 4Arms 5.6Apk) (1044)
This is a high quality stepper motor driver unit from LAM Technologies.

These rugged units are DIN Rail mountable. 

See series Broucher link: 
https://drive.google.com/open?id=1j9_EtHJR1baWrxCmBTUk2R3RNR1pk45D

If you require a datasheet please email Peter at peter@hornet.cc
R2,192  Inc Tax
Microstepping drives DS1041 (50Vdc 1.4Arms 2Apk)
Maximum reliability, high performance, small footprint and low cost are the guidelines followed in the design of the stepper motor drives belonging to the xS10 series .

The company's know-how, gained in over 20 years of experience, has allowed to create a range of drives characterized by compact size, low cost and innovative features.

All the models can drive the stepper motor in bipolar mode, with a resolution up to 1/128 steps, both decimal and binary.
4-6 Weeks Lead Time
https://drive.google.com/drive/folders/0BySRlxy9ZcVccko2MGM3U0lldlE

R2,820  Inc Tax
LAM Technologies Stepper Motor driver DS10 Series 1048 (8ARMs) (1048 )
This is a high quality stepper motor driver unit from LAM Technologies.

These rugged units are DIN Rail mountable. 

See series Broucher link: 
https://drive.google.com/open?id=1j9_EtHJR1baWrxCmBTUk2R3RNR1pk45D

If you require a datasheet please email Peter at peter@hornet.cc
R2,976  Inc Tax
Microstepping drives DS1044 (50Vdc 4Arms 5.6Apk)
Maximum reliability, high performance, small footprint and low cost are the guidelines followed in the design of the stepper motor drives belonging to the xS10 series .

The company's know-how, gained in over 20 years of experience, has allowed to create a range of drives characterized by compact size, low cost and innovative features.

All the models can drive the stepper motor in bipolar mode, with a resolution up to 1/128 steps, both decimal and binary.
4-6 Weeks Lead Time.
https://drive.google.com/drive/folders/0BySRlxy9ZcVccko2MGM3U0lldlE

R3,223  Inc Tax
LAM Technologies Programmable Stepper Motor driver DS30 Series DS3044 (50Vdc 4Arms 5.6Apk) (DS3044)
This is a high quality stepper motor driver unit from LAM Technologies.

These rugged units are DIN Rail mountable. 

See series Broucher link: 
https://drive.google.com/open?id=1j9_EtHJR1baWrxCmBTUk2R3RNR1pk45D

If you require a datasheet please email Peter at peter@hornet.cc
R3,256  Inc Tax
Nema 34 M1343020 (4.4Nm 5.6A)

The maximum torque exceeds 12Nm (1416oz-In) placing this series of stepper motors among the best performing commercially available.

All the motors have 8 wires and can be used both in bipolar and unipolar mode.

When the motors are used in bipolar mode (recommended to obtain the best performance) it is possible to choose between a series type connection, to limit the phase current, or parallel type, for applications exploiting the motors at high speeds.

The 14mm shaft diameter ensures stability in applications with belt transmission. Upon request the motor can be realized with 12mm shaft with key, with double shaft, etc.
4-6 Weeks Lead Time
https://drive.google.com/drive/folders/0BySRlxy9ZcVccko2MGM3U0lldlE

R3,473  Inc Tax
LAM Technologies Stepper Motor driver DS10 Series DS1078 (90Vdc 10Arms 14.1Apk) (1078)
This is a high quality stepper motor driver unit from LAM Technologies.

These rugged units are DIN Rail mountable. 

See series Broucher link: 
https://drive.google.com/open?id=1j9_EtHJR1baWrxCmBTUk2R3RNR1pk45D

If you require a datasheet please email Peter at peter@hornet.cc
R3,725  Inc Tax
LAM Technologies Stepper Motor driver DS5444 (50Vdc 4Arms 5.6Apk) (1044)
This is a high quality stepper motor driver unit from LAM Technologies.

These rugged units are DIN Rail mountable. 

See series Broucher link: 
https://drive.google.com/open?id=1wssemjv6nZ-nXOebrgbSYh6CbhQOmbIx

If you require a datasheet please email Peter at peter@hornet.cc
R3,881  Inc Tax
Microstepping drives DS1048 (50Vdc 8Arms 11.3Apk)
Maximum reliability, high performance, small footprint and low cost are the guidelines followed in the design of the stepper motor drives belonging to the xS10 series .

The company's know-how, gained in over 20 years of experience, has allowed to create a range of drives characterized by compact size, low cost and innovative features.

All the models can drive the stepper motor in bipolar mode, with a resolution up to 1/128 steps, both decimal and binary.
4-6 Weeks Lead Time.
https://drive.google.com/drive/folders/0BySRlxy9ZcVccko2MGM3U0lldlE

R4,378  Inc Tax
LAM Technologies Stepper Motor driver DS5448 (50Vdc 8Arms 11.3Apk) (DS5448)
This is a high quality stepper motor driver unit from LAM Technologies.

These rugged units are DIN Rail mountable. 

See series Broucher link: 
https://drive.google.com/open?id=1wssemjv6nZ-nXOebrgbSYh6CbhQOmbIx

If you require a datasheet please email Peter at peter@hornet.cc
R4,778  Inc Tax
Nema 34 M1343050 (9.2Nm 7.1A)

The maximum torque exceeds 12Nm (1416oz-In) placing this series of stepper motors among the best performing commercially available.

All the motors have 8 wires and can be used both in bipolar and unipolar mode.

When the motors are used in bipolar mode (recommended to obtain the best performance) it is possible to choose between a series type connection, to limit the phase current, or parallel type, for applications exploiting the motors at high speeds.

The 14mm shaft diameter ensures stability in applications with belt transmission. Upon request the motor can be realized with 12mm shaft with key, with double shaft, etc.
4-6 Weeks Lead Time
https://drive.google.com/drive/folders/0BySRlxy9ZcVccko2MGM3U0lldlE

R4,876  Inc Tax
Microstepping drives DS1078 (90Vdc 10Arms 14.1Apk)
Maximum reliability, high performance, small footprint and low cost are the guidelines followed in the design of the stepper motor drives belonging to the xS10 series .

The company's know-how, gained in over 20 years of experience, has allowed to create a range of drives characterized by compact size, low cost and innovative features.

All the models can drive the stepper motor in bipolar mode, with a resolution up to 1/128 steps, both decimal and binary.
4-6 Weeks Lead Time.
https://drive.google.com/drive/folders/0BySRlxy9ZcVccko2MGM3U0lldlE

R5,479  Inc Tax
LAM Technologies Stepper Motor driver DS5478 (90Vdc 10Arms 14.1Apk) (DS5478)
This is a high quality stepper motor driver unit from LAM Technologies.

These rugged units are DIN Rail mountable. 

See series Broucher link: 
https://drive.google.com/open?id=1wssemjv6nZ-nXOebrgbSYh6CbhQOmbIx

If you require a datasheet please email Peter at peter@hornet.cc
R5,634  Inc Tax
Nema 34 M1343060 (12.1Nm 10.0A)

The maximum torque exceeds 12Nm (1416oz-In) placing this series of stepper motors among the best performing commercially available.

All the motors have 8 wires and can be used both in bipolar and unipolar mode.

When the motors are used in bipolar mode (recommended to obtain the best performance) it is possible to choose between a series type connection, to limit the phase current, or parallel type, for applications exploiting the motors at high speeds.

The 14mm shaft diameter ensures stability in applications with belt transmission. Upon request the motor can be realized with 12mm shaft with key, with double shaft, etc.
4-6 Weeks Lead Time
https://drive.google.com/drive/folders/0BySRlxy9ZcVccko2MGM3U0lldlE

R5,648  Inc Tax
Per Page      1 - 40 of 42