Electromechanical

Sort By:  
SS12D00G4 SPDT 1P2T 2 Position 3 Pin PCB Panel Vertical Slide Switch

This is a simple SPDT slide switch - great for use as an ON/OFF button, or just as a general control switch. The pins are spaced by 0.1", however they are incredibly thin making breadboard use not recommended. The switch is rated for 0.3A at 50VDC.

This switch is just a bit smaller than our popular SPDT Mini Power Switch, but uses the same pin spacing. Being smaller takes up less PCB space (good!), but it does make it a bit harder to hit and flip easily.

Tactile Push Button
We use these little buttons on everything! These Miniature Single Pole Single Throw switches have a good click to them and are breadboard friendly. Perfect as a tactile reset switch. These buttons are rated up to 50mA.

Size: 6x6x5mm
Trim Pot 10K Trimmer Potentiometer (10K trim pot)
Multi turn trim pot for fine adjustments.
10K ohm
20K ohm Linear Taper Rotary Potentiometer
Resistance: 20K    
    Adjustment Type:Top Adjustment    
    Maximum Power:0.5W    
    Maximum Voltage:200V    
    Type:Linear    
    Type: B    
    Shaft length :15MM 
Accuracy: ± 20%
220K ohm Linear Taper Rotary Potentiometer
Resistance: 220K    
    Adjustment Type:Top Adjustment    
    Maximum Power:0.5W    
    Maximum Voltage:200V    
    Type:Linear    
    Type: B    
    Shaft length :15MM 
Accuracy: ± 20%
5K ohm Linear Taper Rotary Potentiometer
Resistance: 5K    
    Adjustment Type:Top Adjustment    
    Maximum Power:0.5W    
    Maximum Voltage:200V    
    Type:Linear    
    Type: B    
    Shaft length :15MM 
Accuracy: ± 20%
1K ohm Linear Taper Rotary Potentiometer
Resistance:1K    
    Adjustment Type:Top Adjustment    
    Maximum Power:0.5W    
    Maximum Voltage:200V    
    Type:Linear    
    Type: B    
    Shaft length :15MM 
Accuracy: ± 20%
Potentiometer knobs
Fits the top of the STD Potentiometer knob.
Potentiometer knobs Aluminium
Fits the top of the STD Potentiometer knob.
Piezo Elements Sounder Sensor Trigger Drum Disc 27mm (27mm)
  • Uncased piezo elements
  • Speech and music applications
  • Wide tonal response
  • 12mm with flying leads
Specification:
  • Resonant frequency(KHz)       Fs=9.0±1.0
    Resonant impedance(Ω)      Rr≤500Ω
    Capacitance at 120Hz(NF)    Co=11±30%
    Operating Temperature(℃) -20∽+70
    Storage Temperature(℃)     -30∽+80
  • Color: As the pictures shown
  • Material: Copper,PVC
Mini 5V DC SONGLE Power Relay SRD-5VDC-SL-C PCB Type
These are 5pcs Mini 5V DC SONGLE Power Relay SRD-5VDC-SL-C PCB Type
Contact form: 1a, 1b, 1c
Rated load: 10A 250VAC/28VDC,10A 125VAC/28VDC,10A 125VAC/28VDC
Contact resistance: <=100m (ohm)
Electrical life: 100,000
Mechanical life: 10,000,000
Coil rated voltage: 3-48VDC
Coil power: 0.36W, 0.45W
Coil pick-up voltage: <=75%
Coil drop-out voltage: >=10%
Ambient temperature: -25 degrees Celsius to +70 degrees Celsius
Coil and contacts: 1500VAC/min
Contact and contacts: 1000VAC/min
Insulation resistance: >=100M (ohm)
Mounting form: PCB
Outline dimensions (mm): 19.0x 15.5 x 15.0
MG90S Horns set (MG90S Horns set)
  • Servo horn Set for MG90S
10k Pot special tolerance +/-10% 3 Watt
Resistance: 10K    
    Adjustment Type:Top Adjustment    
    Maximum Power:3W    
    Maximum Voltage:200V    
    Type:Linear    
    Type: B    
    Shaft length :20MM 
Accuracy: ± 10%
4x3 Matrix 12 Key Array Membrane Switch Keypad For Arduino
4 x 3 Matrix 12 Key Array Membrane Switch Keypad Keyboard For Arduino

Description:

Pad Size: 68.9 x 76 x 0.8mm
Cable length: 85mm (include connector)
Connector: dupont 7 pins, 0.1 inch (2.54mm) Pitch
Mount style: Self-Adherence
Max. circuit rating: 35VDC, 100mA
Insulation spec.: 100M Ohm, 100V
Dielectric withstand: 250Vrms (60Hz, 1min)
Contact bounce: ≤5ms
Life expectancy: 1 million closures
Weight: 7g

Package included:

3 x Membrane switch Matrix Array 12 key
5V 2CH Relay Module for Arduino

This is a 2 Channel 5V Relay interface board, Be able to control various appliances, and other equipment with high current. It can be controlled directly by Microcontroller (Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic) .

1、5V 2-Channel Relay interface board, and each one needs 15-20mA Driver Current 
2、Equiped with high-current relay, AC250V 10A ; DC30V 10A 
3、Standard interface that can be controlled directly by Microcontroller (Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic)

Radial Blower fan 50mm
Radial Blower fan 50mm
9g Servo motor (9g)
Specs:
  • Weight : 9g
  • Size : 22mm x 11.5mm x 27 mm
  • Operating Speed (4.8V no load): 0.12sec/60 degrees
  • Torque (4.8V): 17.5oz/in (1.2 kg/cm)
  • Temperature Range: -30 to +60 Degree
  • Dead Band Width: 7usec
  • Operating Voltage:3.0-7.2 Volts
  • All Nylon Gear
  • Connector Wire Length Approx. 250MM(10in)
  • Package: 10 pcs
  • 100% Genuine.
  • Includes servo arms.
Cooling Fan 30x30 with heat sinks
Fan 30X30 mm with heat sinks
20g Servo motor MG996R (MG 996R)
Specs:
  • lifting Weight : 20g
  • Size : 20mm x 40 mm x 39.5 mm
  • Operating Speed (4.8V no load): 0.12sec/60 degrees
  • Torque approximately (4.8V): (150 kg/cm)
  • Temperature Range: -30 to +60 Degree
  • Dead Band Width: 7usec
  • Operating Voltage:3.0-7.2 Volts
  • All Nylon Gear
  • Connector Wire Length Approx. 250MM
  • Includes servo arms.
Ask Peter about data sheets at peter@hornet.cc

Also ask if needing a free running option.

For Datasheet see link
https://drive.google.com/open?id=1H7ky3cAcQpTGmnILeJ_gU2jXxRKakuGc
50k Pot special tolerance 0.25%
Resistance: 5K    
    Adjustment Type:Top Adjustment    
    Maximum Power:0.5W    
    Maximum Voltage:200V    
    Type:Linear    
    Type: B    
    Shaft length :15MM 
Accuracy: ± 0.25%
11kg/cm Servo motor MG995 (MG 996R)

MG995

Specification:

Weight: 55g
Dimension: 40.7×19.7×42.9mm
Stall torque: 9.4kg/cm (4.8v); 11kg/cm (6v)
Operating speed: 0.20sec/60degree (4.8v); 0.16sec/60degree (6.0v)
Operating voltage: 4.8~ 6.6v
Gear Type: Metal gear
Temperature range: 0- 55deg
Dead band width: 1us
servo wire length: 32cm
Current draw at idle 10MA
No load operating current draw 170MA
Stall current draw 1200MA
Servo Plug: JR (Fits JR and Futaba)
servo arms &screws included and fit with Futaba servo arm
It’s universal “S” type connector that fits most receivers, including Futaba, JR, Hitec ,GWS, Cirrus, Blue Bird, Blue Arrow, Corona, Berg, Spektrum.
CE &RoHS approved
We have upgraded our servo gear set and shaft to aluminum 6061-T6.
It is stronger and lighter than copper.

DFRobot relay board

SPECIFICATION

  • Single relay board
  • Rated through-current: 10A (NO) 5A (NC)
  • Maximum switching voltage: 150VAC 24VDC
  • Interface: Digital
  • Control signal: TTL level
  • Contact Rating (Res. Load): 10A 250VAC / 24VDC
  • Max. switching voltage 250VAC / 30VDC
  • Max. switching current 15A
  • Max. switching power 250VA 240W 
  • UL Rating: 10A 120VAC / 10A 250VAC
  • Operate time (at nomi. Vot.): 10ms
  • Release time (at nomi. Vot.): 5ms
  • High quality connector
  • Immersion gold surface
MG90S Metal gear servo (9g)
Specs:
  • Weight : 9g
  • Size : 22mm x 11.5mm x 27 mm
  • Operating Speed (4.8V no load): 0.12sec/60 degrees
  • Torque (4.8V): 17.5oz/in (1.2 kg/cm)
  • Temperature Range: -30 to +60 Degree
  • Dead Band Width: 7usec
  • Operating Voltage:3.0-7.2 Volts
  • All Nylon Gear
  • Connector Wire Length Approx. 250MM(10in)
  • Package: 10 pcs
  • 100% Genuine.
  • Includes servo arms.
solenoid 2 Position 3 Way Electric Mini Micro Solenoid Air Gas valve Release exhaust discouraged Valve

Specifications:

Working fluid: Air, Gas

 

Rated Current: 170mA

 

Rated voltage:12V DC

 

Rated working pressure: 300mmHg

 

Port siza: 2mm

solenoid 2 Position 3 Way Electric Mini Micro Solenoid Air Gas valve Release exhaust discouraged Valve

Specifications:

Working fluid: Air, Gas

 

Rated Current: 170mA

 

Rated voltage:12V DC

 

Rated working pressure: 300mmHg

 

Port siza: 2mm

FS5103R Continuous Servo Motor (FS5103R )
  • FS5103R Continuous Servo Motor
  • Operating Speed: 0.18sec / 60degree (4.8V), 0.16sec / 60degree (6V)
  • Stall Torque: 3kg.cm / 41.74oz.in(4.8V), 3.2kg.cm / 44.52oz.in(6V)
  • Operating Voltage: 4.8V~6V
  • Control System: Analog / Direction: CCW
  • Operating Angle: 360degree / Required Pulse: 500us-2500us
DFROBOT water flow sensor

SPECIFICATION

  • Inner Diameter: 11 mm
  • Outside diameter: 20 mm
  • Proof Water Pressure: <1.75 MPa
  • Water Flow Range: 1-30 L/min
  • Voltage Range: 3.5~12 V
  • Operating Current: 15 mA (DC 5V)
  • Insulation Resistance: >100 MΩ
  • Accuracy: ±5% (2~30L/min)
  • The Output Pulse High Level: >4.7 VDC (DC input voltage 5 V)
  • The Output Pulse Low Level: <0.5 VDC (DC input voltage 5 V)
  • Output Pulse Duty Ratio: 50% ± 10%
  • Water-flow Formula: 1L = 450 square waves
  • Working Humidity Range: 25% ~ 95% RH (no frost)
  • Dimension: 62*36*35 mm/2.44*1.37*1.37 inches
  • Weight: 52g
20g Servo motor PDI 6221MG (MG 996R)
Specs:
  • lifting Weight : 20g
  • Size : 20mm x 40 mm x 39.5 mm
  • Operating Speed (4.8V no load): 0.12sec/60 degrees
  • Torque approximately (4.8V): (150 kg/cm)
  • Temperature Range: -30 to +60 Degree
  • Dead Band Width: 7usec
  • Operating Voltage:3.0-7.2 Volts
  • All Nylon Gear
  • Connector Wire Length Approx. 250MM
  • Includes servo arms.
Ask Peter about data sheets at peter@hornet.cc

Also ask if needing a free running option.

For Datasheet see link
https://drive.google.com/open?id=1H7ky3cAcQpTGmnILeJ_gU2jXxRKakuGc
solenoid 12 volt Push/Pull
Description:
DC 12V Small Electromagnetic Electric Magnet 35mm Long Stroke Push Pull Solenoid Electric Magnet
 
Specifications
Voltage: DC 12V
Current: 8A
Stroke: 35mm
Size: approx. 64x32x38mm
Suitable For: Vending machines, transport equipment, office facility household appliance, mechanical, etc.
Quantity: 1pc
Ballscrew Carrage and Integrated NEMA 23 Motor (Shop Soiled, make an offer)
Specifications
Materials:Aluminum alloy
Effective Travel: 300mm
Overall Size: 460mm*110mm
Slide Width: 90mm*45mm
The Number Of Sliders: 1
Accuracy: 0.01mm
Round Trip Accuracy: 0.05-0.08mm
Ambient Temperature: -10℃-50℃
Quantity: 1pc
Add to Cart
R4,025
Per Page      1 - 36 of 36
  • 1