Relays

Sort By:  
Mini 5V DC SONGLE Power Relay SRD-5VDC-SL-C PCB Type
These are 5pcs Mini 5V DC SONGLE Power Relay SRD-5VDC-SL-C PCB Type
Contact form: 1a, 1b, 1c
Rated load: 10A 250VAC/28VDC,10A 125VAC/28VDC,10A 125VAC/28VDC
Contact resistance: <=100m (ohm)
Electrical life: 100,000
Mechanical life: 10,000,000
Coil rated voltage: 3-48VDC
Coil power: 0.36W, 0.45W
Coil pick-up voltage: <=75%
Coil drop-out voltage: >=10%
Ambient temperature: -25 degrees Celsius to +70 degrees Celsius
Coil and contacts: 1500VAC/min
Contact and contacts: 1000VAC/min
Insulation resistance: >=100M (ohm)
Mounting form: PCB
Outline dimensions (mm): 19.0x 15.5 x 15.0
R17  Inc Tax
5V Relay Module
R29  Inc Tax
5V 2CH Relay Module for Arduino

This is a 2 Channel 5V Relay interface board, Be able to control various appliances, and other equipment with high current. It can be controlled directly by Microcontroller (Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic) .

1、5V 2-Channel Relay interface board, and each one needs 15-20mA Driver Current 
2、Equiped with high-current relay, AC250V 10A ; DC30V 10A 
3、Standard interface that can be controlled directly by Microcontroller (Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic)

R52  Inc Tax
5V 4CH Relay Module for Arduino

This is a 4 Channel 5V Relay interface board, Be able to control various appliances, and other equipment with high current. It can be controlled directly by Microcontroller (Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic) .

1、5V 4-Channel Relay interface board, and each one needs 15-20mA Driver Current 
2、Equiped with high-current relay, AC250V 10A ; DC30V 10A 
3、Standard interface that can be controlled directly by Microcontroller (Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic)

R60  Inc Tax
DFRobot relay board

SPECIFICATION

  • Single relay board
  • Rated through-current: 10A (NO) 5A (NC)
  • Maximum switching voltage: 150VAC 24VDC
  • Interface: Digital
  • Control signal: TTL level
  • Contact Rating (Res. Load): 10A 250VAC / 24VDC
  • Max. switching voltage 250VAC / 30VDC
  • Max. switching current 15A
  • Max. switching power 250VA 240W 
  • UL Rating: 10A 120VAC / 10A 250VAC
  • Operate time (at nomi. Vot.): 10ms
  • Release time (at nomi. Vot.): 5ms
  • High quality connector
  • Immersion gold surface
R104  Inc Tax
Modbus RTU 4 Channel Relay Module 4CH Input Optocoupler Isolation RS485 MCU For Arduino
Pin description:

1. LED connected to user LED
2. TX RX is connected to 485 port and pin TTL port
3. KEY user button (red button on the left)
4. EN 485 use end
5. IN1 -IN4 input port is directly connected to the terminal
6. K1 - K4 relay output control
7. SWIM burning program J13
Package Included:

1 x Modbus RTU 4 channel Relay Module 
R251  Inc Tax
Per Page      1 - 6 of 6
  • 1