Actuonix Linear actuator Model PQ12-100-6-R Servo Motor

R1,357.00 INC VAT

Out of stock

Product Code: C05 B02 P004 Categories: , , , Tags: , ,



Actuonix PQ12-R Actuator 20mm, RC Control
Input voltage: 6 VDC
Peak power point: 40 N @ 6 mm/s
Gear ratio: 100:1
Max speed (no load): 10 mm/s
Stall current: 550 mA
The PQ12-R Linear Actuator 20mm, 100:1, 6V, RC Control operates as a direct replacement for standard rotary servos. It uses the same standard 3 wires connectors, ground, power, and control. Regardless of how you drive your servos, driven with an RC receiver, an Arduino board, or a VEX micro-controller, the PQ12-R servo perfectly replaces a regular servo with the added benefit of providing linear motion.

The -R actuators are ideally suited to use in robotics and radio control models. They are a direct replacement for regular radio-controlled hobby servos. The desired actuator position is input to the actuator on lead 1 as a positive 5 Volt pulse width signal. A 2.0 ms pulse commands the controller to fully retract the actuator and a 1.0 ms pulse signals it to fully extend.

If the motion of the actuator, or of other servos in your system, seems erratic, place a 1–4Ω resistor in series with the actuator’s red V+ lead wire.

The PQ12–R Linear Servos are designed to work with typical RC receivers and battery packs. Consequently, they also are compatible with Arduino control boards, VEX Microcontrollers, and many other similar boards designed for robotics.


Gearing ratio: 100:1
Peak power point: 40 N @ 6 mm/s
Peak efficiency point: 20 N @ 8 mm/s
Max speed (no load): 10 mm/s
Max force (lifted): 50 N
Max side Load: 10 N
Back drive force: 35 N
Stroke: 20 mm
Input voltage: 6 VDC
Stall current: 550 mA
Mass: 15 g
Operating temperature: -10 to +50 °C
Positional accuracy: ±0.1 mm
Duty Cycle: 20%
Audible noise: 55 dB @ 45 cm
Ingress protection: IP-54
Feedback potentiometer: 5kΩ ±50%
Limit switches: Max. current leakage: 8uA

Additional information

Weight 0.1 kg