This miniature linear actuator is used for industrial, agricultural machinery, construction machinery, sweeping vehicles, ships, cargo and many other applications.
It can be replaced with hydraulic, pneumatic products ideal for energy savings.
Material: Aluminum alloy
Load capacity: 1500N
Speed: 6mm / s
Input voltage: 12V DC
Stroke length: 100mm / 4 inch
Rated power: 20 W, maximum 30 W.
Push housing side contains a limit switch on each end. When the telescopic bar runs to the top or to the top, it automatically disconnects the the drive power in that direction.
The linear actuator can stop at any position, with self-locking function.
The pushrod is driven by a DC motor with a screw drive.
The motor has a positive and a negative pole. For example, if the positive electrode and the negative electrode are powered +ve and -ve then the rod will extend if they are energies -ve and +ve the rod will retract.
Ambient temperature -20 ° C to + 75 ° C.
Standard protection class: IP54.
Low-noise design, noise level less than 42dB.
Please do not disassemble the machine.
Product features: drive other objects to push, pull, rise, drop.
Product Applications: TV lift tables, massage beds, electric beds, medical chairs, electrical equipment, micro devices, electric couches, camera frames, cameras and more.
(1): the center distance between the two mounting holes before and after the push rod is fully retracted, the mounting distance of the push rod
(That is, the length of the push rod itself).
L (installation dimensions) = 105mm + S (stroke)
(2): center distance between the two mounting holes before and after the push rod fully extended.
(Below 300mm stroke) = 105mm + S (stroke) + S (stroke)
(300mm and 300mm strokes or more) = 155mm + S (stroke) + S (stroke).
Before first use, recognize whether the motor voltage is correct. If it is a DC motor, then also consider that the current supply is sufficient.
Store or operate in high temperature or humid environment, and not in corrosive gas, which will reduce engine efficiency.
Do not deform the plastic.
When installing the motor, pay attention to whether the screws are too long and the should not over-press the long screws to the parts inside the motor.
Note: Bracket and controllers must be purchased, please search our products in our store, and purchase the suitable kit.
1 × Linear Actuator Motor